Store Finder Button
Store Finder Button
Solving Poor Hiding Problems2018-12-19T09:21:13-05:00

SOLVING

POOR HIDING PROBLEMS

POOR HIDING

Failure of dried paint to obscure or “hide” the surface to which it is applied.

POSSIBLE CAUSES:

  • Use of low quality paint.
  • Use of low quality tools/wrong roller cover.
  • Use of an improper combination of tinting base and tinting color.
  • Poor flow and leveling (see Poor Flow/Leveling).
  • Use of a paint that is much lighter in color than the substrate, or that primarily contains low-hiding organic pigments.
  • Application of paint at a higher spread rate than recommended.

SOLUTION:

  • If the substrate is significantly darker or is a patterned wallpaper, it should be primed before applying a top coat.
  • Use a top quality paint for better hiding and flow.
  • Use quality tools; use the recommended roller nap, if rolling.
  • Follow manufacturer’s recommendation on spread rate; if using tinted paint, use the correct tinting base.
  • Where a low-hiding organic color must be used, apply a primer first.

pqi logo short
Note
: Images & information provided by The Rohm & Hass Paint Quality Institute.